There was a long-existing flaw in the documentation for ms-self, krb5-self, ms-subdomain, and krb5-subdomain rules in update-policy statements. Though the policies worked as intended, operators who configured their servers according to the misleading documentation may have thought zone updates were more restricted than they were; users of these rule types are advised to review the documentation and correct their configurations if necessary. New rule types matching the previously documented behavior will be introduced in a future maintenance release. [GL !708]

When recursion is enabled but the allow-recursion and allow-query-cache ACLs are not specified, they should be limited to local networks, but they were inadvertently set to match the default allow-query, thus allowing remote queries. This flaw is disclosed in CVE-2018-5738. [GL #309]

named could crash during recursive processing of DNAME records when deny-answer-aliases was in use. This flaw is disclosed in CVE-2018-5740. [GL #387]

A new secondary zone option, mirror, enables named to serve a transferred copy of a zone's contents without acting as an authority for the zone. A zone must be fully validated against an active trust anchor before it can be used as a mirror zone. DNS responses from mirror zones do not set the AA bit ("authoritative answer"), but do set the AD bit ("authenticated data"). This feature is meant to facilitate deployment of a local copy of the root zone, as described in RFC 7706. [GL #33]

BIND now can be compiled against the libidn2 library to add IDNA2008 support. Previously, BIND supported IDNA2003 using the (now obsolete and unsupported) idnkit-1 library.

named now supports the "root key sentinel" mechanism. This enables validating resolvers to indicate which trust anchors are configured for the root, so that information about root key rollover status can be gathered. To disable this feature, add root-key-sentinel no; to named.conf. [GL #37]

The dnskey-sig-validity option allows the sig-validity-interval to be overriden for signatures covering DNSKEY RRsets. [GL #145]

Support for QNAME minimization was added and enabled by default in relaxed mode, in which BIND will fall back to normal resolution if the remote server returns something unexpected during the query minimization process. This default setting might change to strict in the future.

When built on Linux, BIND now requires the libcap library to set process privileges. The adds a new compile-time dependency, which can be met on most Linux platforms by installing the libcap-dev or libcap-devel package. BIND can also be built without capability support by using configure --disable-linux-caps, at the cost of some loss of security.

The validate-except option specifies a list of domains beneath which DNSSEC validation should not be performed, regardless of whether a trust anchor has been configured above them. [GL #237]

Workarounds for servers that misbehave when queried with EDNS have been removed, because these broken servers and the workarounds for their noncompliance cause unnecessary delays, increase code complexity, and prevent deployment of new DNS features. See https://dnsflagday.net for further details.

In particular, resolution will no longer fall back to plain DNS when there was no response from an authoritative server. This will cause some domains to become non-resolvable without manual intervention. In these cases, resolution can be restored by adding server clauses for the offending servers, specifying edns no or send-cookie no, depending on the specific noncompliance.

To determine which server clause to use, run the following commands to send queries to the authoritative servers for the broken domain:

If the first command fails but the second succeeds, the server most likely needs send-cookie no. If the first two fail but the third succeeds, then the server needs EDNS to be fully disabled with edns no.

Please contact the administrators of noncompliant domains and encourage them to upgrade their broken DNS servers. [GL #150]

Previously, it was possible to build BIND without thread support for old architectures and systems without threads support. BIND now requires threading support (either POSIX or Windows) from the operating system, and it cannot be built without threads.

named can no longer use the EDNS CLIENT-SUBNET option for view selection. In its existing form, the authoritative ECS feature was not fully RFC-compliant, and could not realistically have been deployed in production for an authoritative server; its only practical use was for testing and experimentation. In the interest of code simplification, this feature has now been removed.

The ECS option is still supported in dig and mdig via the +subnet argument, and can be parsed and logged when received by named, but it is no longer used for ACL processing. The geoip-use-ecs option is now obsolete; a warning will be logged if it is used in named.conf. ecs tags in an ACL definition are also obsolete, and will cause the configuration to fail to load if they are used. [GL #32]

dnssec-keygen can no longer generate HMAC keys for TSIG authentication. Use tsig-keygen to generate these keys. [RT #46404]

Support for OpenSSL 0.9.x has been removed. OpenSSL version 1.0.0 or greater, or LibreSSL is now required.

The configure --enable-seccomp option, which formerly turned on system-call filtering on Linux, has been removed. [GL #93]

IPv4 addresses in forms other than dotted-quad are no longer accepted in master files. [GL #13] [GL #56]

IDNA2003 support via (bundled) idnkit-1.0 has been removed.

The "rbtdb64" database implementation (a parallel implementation of "rbt") has been removed. [GL #217]

The -r randomdev option to explicitly select random device has been removed from the ddns-confgen, rndc-confgen, nsupdate, dnssec-confgen, and dnssec-signzone commands.

The -p option to use pseudo-random data has been removed from the dnssec-signzone command.

Support for ECC-GOST (GOST R 34.11-94) algorithm has been removed from BIND as the algorithm has been superseded by GOST R 34.11-2012 in RFC6986 and it must not be used in new deployments. BIND will neither create new DNSSEC keys, signatures and digest, nor it will validate them.

Add the ability to not return a DNS COOKIE option when one is present in the request. To prevent a cookie being returned add 'answer-cookie no;' to named.conf. [GL #173]

answer-cookie is only intended as a temporary measure, for use when named shares an IP address with other servers that do not yet support DNS COOKIE. A mismatch between servers on the same address is not expected to cause operational problems, but the option to disable COOKIE responses so that all servers have the same behavior is provided out of an abundance of caution. DNS COOKIE is an important security mechanism, and should not be disabled unless absolutely necessary.

Remove support for silently ignoring 'no-change' deltas from BIND 8 when processing an IXFR stream. 'no-change' deltas will now trigger a fallback to AXFR as the recovery mechanism.

BIND 9 will no longer build on platforms that doesn't have proper IPv6 support. BIND 9 now also requires non-broken POSIX-compatible pthread support. Such platforms are usually long after their end-of-life date and they are neither developed nor supported by their respective vendors.

BIND will now always use the best CSPRNG (cryptographically-secure pseudo-random number generator) available on the platform where it is compiled. It will use arc4random() family of functions on BSD operating systems, getrandom() on Linux and Solaris, CryptGenRandom on Windows, and the selected cryptography provider library (OpenSSL or PKCS#11) as the last resort. [GL #221]

The default setting for dnssec-validation is now auto, which activates DNSSEC validation using the IANA root key. (The default can be changed back to yes, which activates DNSSEC validation only when keys are explicitly configured in named.conf, by building BIND with configure --disable-auto-validation.) [GL #30]

BIND can no longer be built without DNSSEC support. A cryptography provider (i.e., OpenSSL or a hardware service module with PKCS#11 support) must be available. [GL #244]

Zone types primary and secondary are now available as synonyms for master and slave, respectively, in named.conf.

named will now log a warning if the old root DNSSEC key is explicitly configured and has not been updated. [RT #43670]

dig +nssearch will now list name servers that have timed out, in addition to those that respond. [GL #64]

dig +noidnin can be used to disable IDN processing on the input domain name, when BIND is compiled with IDN support.

Up to 64 response-policy zones are now supported by default; previously the limit was 32. [GL #123]

Several configuration options for time periods can now use TTL value suffixes (for example, 2h or 1d) in addition to an integer number of seconds. These include fstrm-set-reopen-interval, interface-interval, max-cache-ttl, max-ncache-ttl, max-policy-ttl, and min-update-interval. [GL #203]

NSID logging (enabled by the request-nsid option) now has its own nsid category, instead of using the resolver category.

Running rndc reconfig could cause inline-signing zones to stop signing. [GL #439]

Reloading all zones caused zone maintenance to stop for inline-signing zones. [GL #435]

Signatures loaded from the journal for the signed version of an inline-signing zone were not scheduled for refresh. [GL #482]

A referral response with a non-empty ANSWER section was incorrectly treated as an error; this caused certain domains to be non-resolvable. [GL #390]

named now rejects excessively large incremental (IXFR) zone transfers in order to prevent possible corruption of journal files which could cause named to abort when loading zones. [GL #339]