named — Internet domain name server
named
[
[-4]
| [-6]
]
[-c ]
[config-file-d ]
[debug-level-D ]
[string-E ]
[engine-name-f]
[-g]
[-L ]
[logfile-M ]
[option-m ]
[flag-n ]
[#cpus-p ]
[port-s]
[-S ]
[#max-socks-t ]
[directory-U ]
[#listeners-u ]
[user-v]
[-V]
[-X ]
[lock-file-x ]
cache-file
named is a Domain Name System (DNS) server, part of the BIND 9 distribution from ISC. For more information on the DNS, see RFCs 1033, 1034, and 1035.
When invoked without arguments, named
will
read the default configuration file
/etc/named.conf, read any initial
data, and listen for queries.
Use IPv4 only even if the host machine is capable of IPv6.
-4 and -6 are mutually
exclusive.
Use IPv6 only even if the host machine is capable of IPv4.
-4 and -6 are mutually
exclusive.
config-file
Use config-file as the
configuration file instead of the default,
/etc/named.conf. To
ensure that reloading the configuration file continues
to work after the server has changed its working
directory due to to a possible
directory option in the configuration
file, config-file should be
an absolute pathname.
debug-level
Set the daemon's debug level to debug-level.
Debugging traces from named become
more verbose as the debug level increases.
string
Specifies a string that is used to identify a instance of
named in a process listing. The contents
of string are
not examined.
engine-nameWhen applicable, specifies the hardware to use for cryptographic operations, such as a secure key store used for signing.
When BIND is built with OpenSSL PKCS#11 support, this defaults to the string "pkcs11", which identifies an OpenSSL engine that can drive a cryptographic accelerator or hardware service module. When BIND is built with native PKCS#11 cryptography (--enable-native-pkcs11), it defaults to the path of the PKCS#11 provider library specified via "--with-pkcs11".
Run the server in the foreground (i.e. do not daemonize).
Run the server in the foreground and force all logging
to stderr.
logfile
Log to the file logfile by default
instead of the system log.
option
Sets the default memory context options. If set to
external,
this causes the internal memory manager to be bypassed
in favor of system-provided memory allocation functions.
If set to fill,
blocks of memory will be filled with tag values when allocated
or freed, to assist debugging of memory problems.
(nofill
disables this behavior, and is the default unless
named has been compiled with developer
options.)
flag
Turn on memory usage debugging flags. Possible flags are
usage,
trace,
record,
size, and
mctx.
These correspond to the ISC_MEM_DEBUGXXXX flags described in
<isc/mem.h>.
#cpus
Create #cpus worker threads
to take advantage of multiple CPUs. If not specified,
named will try to determine the
number of CPUs present and create one thread per CPU.
If it is unable to determine the number of CPUs, a
single worker thread will be created.
port
Listen for queries on port port. If not
specified, the default is port 53.
Write memory usage statistics to stdout on exit.
This option is mainly of interest to BIND 9 developers and may be removed or changed in a future release.
#max-socks
Allow named to use up to
#max-socks sockets.
The default value is 4096 on systems built with default
configuration options, and 21000 on systems built with
"configure --with-tuning=large".
This option should be unnecessary for the vast majority of users. The use of this option could even be harmful because the specified value may exceed the limitation of the underlying system API. It is therefore set only when the default configuration causes exhaustion of file descriptors and the operational environment is known to support the specified number of sockets. Note also that the actual maximum number is normally a little fewer than the specified value because named reserves some file descriptors for its internal use.
directoryChroot
to directory after
processing the command line arguments, but before
reading the configuration file.
This option should be used in conjunction with the
-u option, as chrooting a process
running as root doesn't enhance security on most
systems; the way chroot(2) is
defined allows a process with root privileges to
escape a chroot jail.
#listeners
Use #listeners
worker threads to listen for incoming UDP packets on each
address. If not specified, named will
calculate a default value based on the number of detected
CPUs: 1 for 1 CPU, and the number of detected CPUs
minus one for machines with more than 1 CPU. This cannot
be increased to a value higher than the number of CPUs.
If -n has been set to a higher value than
the number of detected CPUs, then -U may
be increased as high as that value, but no higher.
On Windows, the number of UDP listeners is hardwired to 1
and this option has no effect.
userSetuid
to user after completing
privileged operations, such as creating sockets that
listen on privileged ports.
On Linux, named uses the kernel's
capability mechanism to drop all root privileges
except the ability to bind(2) to
a
privileged port and set process resource limits.
Unfortunately, this means that the -u
option only works when named is
run
on kernel 2.2.18 or later, or kernel 2.3.99-pre3 or
later, since previous kernels did not allow privileges
to be retained after setuid(2).
Report the version number and exit.
Report the version number and build options, and exit.
lock-file
Acquire a lock on the specified file at runtime; this
helps to prevent duplicate named instances
from running simultaneously.
Use of this option overrides the lock-file
option in named.conf.
If set to none, the lock file check
is disabled.
cache-file
Load data from cache-file into the
cache of the default view.
This option must not be used. It is only of interest to BIND 9 developers and may be removed or changed in a future release.
In routine operation, signals should not be used to control the nameserver; rndc should be used instead.
Force a reload of the server.
Shut down the server.
The result of sending any other signals to the server is undefined.
The named configuration file is too complex to describe in detail here. A complete description is provided in the BIND 9 Administrator Reference Manual.
named inherits the umask
(file creation mode mask) from the parent process. If files
created by named, such as journal files,
need to have custom permissions, the umask
should be set explicitly in the script used to start the
named process.
BIND 9.14.0rc2 (Stable Release)